Auf Grund der aktuellen Situation kann es zu Lieferverzögerungen seitens der Hersteller kommen. Wir bitten um Ihr Verständnis.
Unsere telefonischen Sprechzeiten sind von Montag-Freitag von 10.00-13.00 Uhr.
Wenn Sie uns telefonisch nicht erreichen, dann schreiben Sie uns eine E-Mail und hinterlassen Sie Ihre Telefonnummer, dann können wir Sie gerne zurück rufen.
COOKIES
Diese Seite verwendet Cookies. Indem Sie die Website sowie ihre Angebote nutzen und weiter navigieren, erklären Sie sich mit der Nutzung von Cookies einverstanden. Dies können Sie in Ihren Browsereinstellungen ändern. Mehr über Cookies erfahren.
Link Engine Management G4X GTTLink NGTT-X Plug-In ECU
Details
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
The NGTTX is Designed to suit the grey plug RB (typically neo) engine.
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
Most factory features are supported.
Note, this ECU does not currently output the 4wd signal required for proper 4wd operation in 4wd Stageas and skylines.
Check the features tab for I/O expansion options
Suitable applications:
RB20DE NEO, RB25DE NEO and RB25DET NEO in R34 Skylines
RB20DE NEO, RB25DE NEO and RB25DET NEO in C35 Laurels
RB20DE NEO, RB25DE NEO and RB25DET NEO in Nissan Stageas
- Plus, non neo motors in Stageas
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"
I/O Expansion Options:
The following expansion connector inputs/outputs are provided:
Expansion connector 1
SGnd Sensor Ground Only
+5V Out Low Current +5V Supply
DI 7 Digital Input
DI 8 Digital Input
An Volt 10 Analog 0-5V input
An Volt 9 Analog 0-5V input
Ign 7 Ignition 7 Auxiliary Output
Ign 8 Ignition 8 Auxiliary Output
Expansion connector 2
SGnd Sensor Ground Only
+5V Out Low Current +5V Supply
DI 5 Digital Input
DI 6 Digital Input
An Volt 5 Analog 0-5V input
An Volt 6 Analog 0-5V input
An Temp 2 Temperature sensor input
An Temp 3 Temperature sensor input
Pin 108 – OBD1 wire now used for IAT on Temp 4.
Download Manual
Click here to download the user manual.
Click here to download the full Specifications PDF.
At Link ECU, our range of standalone ECU’s meets the needs for performance cars, drag racing, drifting, jetski’s, snowmobiles, aircraft, speedway and jet-sprint racing vehicles around the world. Our product range also features a wide variety of accessories including CAM Lambda sensors, the G4+ knockblock, o2 sensors, boost control solenoid’s and much more. We are extremely proud of the quality of this range which has been over 25 years in the making.
Today, Link exports to over 65 countries and our products are renowned for quality, reliability and value for money.
Our dealers around the world are experts in horsepower, assisting you to unleash the potential of your engine by fitting, installing and tuning all Link products.We look forward to having you join us on the road to success. Exhilaration starts here!
Motorsport is in our DNA
From our humble beginnings in Rally to today’s wide use of Link ECUs in all kinds of car racing, Link has always maintained a strong connection with motorsport.
Solid Network of Tuners
No matter where you are in the world there is a Link Dealer who can supply, install & tune an ECU for your vehicle.
Proudly New Zealand made
Link ECUs (Engine Control Units) are 100% New Zealand designed and developed, with head office based in Christchurch, New Zealand.
We Stand Behind What We Sell
Link Engine Management limited lifetime warranty. No tricks, no catches. If it breaks in the normal course of its designed use then we will repair or replace, no questions asked.
Active in Racing through driver sponsorship
We keep our finger on the pulse by sponsoring a range of drivers across a range of levels to ensure we keep up-to-date with the latest trends and bends in motorsport.
Dedicated Support Team
Our highly talented support team are here to answer any questions you may have.
LINK ENGINE MANAGEMENT LTD – LIMITED LIFETIME WARRANTY
All Engine Control Units (ECUs) manufactured by Link Engine Management Ltd are subject to the following LIMITED LIFETIME WARRANTIES, and no others.
Link Engine Management Ltd warrants only to the original purchaser of the ECU, for the lifetime of the ECU, (subject to the limitations set out below), that the ECU shall be free from defects of materials
and workmanship in the manufacturing process. This warranty ceases to apply and does not apply to ECUs that have not been manufactured by Link Engine Management Ltd for a period of greater than one year.
An ECU claimed to be defective must be returned to the place of purchase. Link Engine Management Ltd, at its sole option, may replace the defective ECU with a comparable new ECU or repair the defective ECU.
This limited lifetime warranty is not transferable and does not apply to any ECU not properly installed or properly used by the purchaser or end user, or to any ECU damaged or impaired by external forces. The above warranties are the full extent of the warranties available on the ECU. Link Engine Management Ltd has no liability to the original purchaser or any other person for any loss, injury or damage to persons or property resulting from the use of the ECU or any failure of or defect in the ECU whether by general, special, direct, indirect, incidental, consequential, exemplary, punitive, or
any other damages of any kind or nature whatsoever. Link Engine Management Ltd specifically disclaims and disavows all other warranties, express or implied, including, without limitation, all warranties of fitness for a particular purpose, warranties of description, warranties of merchantability, trade usage or warranties of trade usage.
For off-road use only, not intended for highway vehicles. This ECU contains a user-configurable software programme, which is updated by Link Engine Management Ltd from time to time. The user must ensure the current correct version of this programme is downloaded from the website of Link Engine Management Ltd and installed in the ECU prior to use. This limited lifetime warranty does not apply where the ECU has been installed with the incorrect version of the software programme. The user is solely responsible for the setup and testing of all user-configurable features.
Link Engine Management Ltd License Agreement
The software programme in this ECU is licensed not sold. Link Engine Management Ltd grants the user a license for the programme only in the country where
the programme was acquired. No other rights are granted under this license and the programme may only be used on one machine at a time. If the programme is transferred a copy of this license and all other documentation must be transferred at the same time. The license may be terminated by the user at any time. Link Engine Management Ltd may terminate the licence if the user fails to comply with the terms and conditions of this license. In either event the copy of the programme must be destroyed.
